TopoStackGuides
Browse guides

Redfish Lake depth map

Redfish Lake in Jackson County, Texas has a surveyed depth grid from NOAA National Bathymetric Source: Gulf Coast lakes. Open it in the studio to make a layered laser-cut lake map or a flat engraving of its shoreline and lake floor.

Open Redfish Lake in the studio

The studio frames the survey area, turns on Water depth and generates the terrain, ready to adjust and export as SVG layers.

Map of where Redfish Lake is in Jackson County, Texas, about 400 km across50 km
The orange marker is the survey area; dots are other lakes with depth data. Map data: Natural Earth.

Survey facts

LocationJackson County, Texas
Centre28.7861° N, 96.5660° W
Survey area1.7 km east–west × 2.6 km north–south
Depth dataSurveyed grid
SourceNOAA National Bathymetric Source: Gulf Coast lakes. NOAA Office of Coast Survey National Bathymetric Source; survey sources licensed CC0 1.0 or CC BY 4.0. Only measured survey cells are used; modelled fill removed by TopoStack. Not for navigation.

About 97% of the lake is surveyed. NOAA National Bathymetric Source survey cells only; modelled fill is removed and uncovered parts use the basin model. Depths are below the surveys’ chart datum (MLLW on tidal water, low-water datum on the Great Lakes), not a live water level.

Sizing a piece

Framed to the whole survey area, the map keeps its portrait shape. These are the scales at three common sizes. A tighter frame zooms in and a wider one adds shoreline, and the studio recalculates both.

Piece sizeMap scale
193 × 305 mm (7.6 × 12 in)about 1:8,600
257 × 406 mm (10.1 × 16 in)about 1:6,400
386 × 610 mm (15.2 × 24 in)about 1:4,300

Your sheet thickness sets the number of layers. If the lake needs more sheets than you want to cut, Fit depth compresses the lake floor and keeps the shoreline. If the piece is bigger than your laser bed, split it into interlocking pieces.

Nearby lakes with depth data

More about lake maps

Survey dates and water levels vary, and a survey can cover only part of a lake. Exports include an ATTRIBUTION.txt crediting the source; see sources and attribution. Depth data is decorative source material, not for navigation.

Create a topographic map